Good introduction to the operations of Fusion 360, how to navigate its features and the benefits of the Fusion 360 platform.

Content is a manageable length and very clear to understand. Would recommend for those who are just beginning working with 3D design or have never used a CAD/CAM software package.

I really liked that it explored the various areas of file management near the end. That is often uninteresting, which leads to very poor file management, becoming one of the big pain points of collaborative projects. I think this course provided useful insight into a much-neglected area.

The course was great, I got to learn about a lot of stuff that I wasn't knowing and loved the way they explained things. But I what I didn't liked much is that there are a lot of videos of just 1 min long or even lesser. It would be better if one could club all together and watch them.

The introduction to digital manufacturing is a really good lecture. The learning is fun, pictorial based, and overall, a delight to attend.

But I felt, the Autodesk part was a bit of a drag. Some of the features could have been muted, or atleast run through fairly quickly.

Great course, however I think they need to make sure the quiz questions are still accurate to Autodesk Fusion 360. I know this program updates a lot and this may be hard to keep up with the changes that happen. Otherwise a very informative and useful course.

The course is really good on the sustainability part but there is an observation in the version of Fusion 360 with the last update and is that there are somethings that already not coincidence with the videos in the course and sometimes it's confusing.

A good introductory course to digital manufacturing and Fusion 360 software.

I especially like the sessions introducing the ideas of sustainable design. I think its far more important than to mastering CAD skills for designers and engineers these days.

Very good intro to the new updates in the digital manufacturing and good review on the mechanical engineering design principals , The second part of the course illustrates how to be familiar with the Fusion 360 especially while working with a team.

I learned a lot about the basics of design and Fusion 360, however they should update the videos with the latest version of the software. All of the workspaces have changed and it can be quite confusing to follow sometimes.

The course if clear and easy to follow. The only issue is the videos are based on an older version of Fusion 360(circa 2017). Some of the directions were difficult to find due to a change in layout of the software.

Had no idea about Fusion 360 but after taking this introductory course, I now have the basics of the whole course. Looking forward to joining the other courses of the main Digital manufacturing course!

Would have been better, with more hands-on exercises; some of the course exercises cannot be followed because of changes in Fusion 360's UI, e.g. the discussion & calendar features in team hub.

Le hubiera dado las 5 estrellas si el curso hubiera estado actualizado a la version ultima del programa, hay algunas modificaciones que al principio he tenido que buscar las ubicaciones.

Some material needs update. Like the calendar and discussions feature. They seem to have been phased out from the current version of 360, yet it is still discussed on the course.

It's more in to the navigation but it does say to take the Autodesk design academy introduction to 3D modeling to get some practice with the Fusion 360 on the drawing features.

It would be nice if the videos were updated to the new UI. When using the new UI it is rather disconcerting at times trying to follow the legacy UI compared to the current UI.

The tutorials are starting from very basic. So, its very easy to understand by anyone. and mini assignments comes between the lecture which increases intrest in learning.

Good & basic course to understand what fusion 360 is and what are the tools involved so that you can use them all for your benefit. Can be completed within 2 Days(max.)

This is a good introductory course. It not only teaches you how the software works, but also focusses on important aspects like sustainability, product life time etc.

It was a very good course and the instructions are very clear and fun to watch. But there is very less information different tool for doing a project individual level.

A very good course to familiarize yourself with Manufacturing and current advancements in the field. You also get to learn how Fusion 360 can help in collaboration.

it is a very good basic tutorial of Fusion 360 and the hub it includes. I wish there would've been more modelling exercises and less tram hub and cloud exercises.

It was mainly focused on the non-design aspect of fusion 360, but this is a intro so that's understandable, however 4 weeks for this course is just ridiculous

Really good course to get the basic understanding and theoretical knowledge behind product design and designing software. Specifically, Autodesk Fusion 360.

It's giving a clear basic knowledge in fusion 360. contents was clear and easy to understand. Thanks alot coursera for offering this to me for free..!!