[MUSIC] In this module, we're going to move the SMB, from local management to central management currently if we want to manage the SMB and I mean managing the firewall rules, access, control, threat prevention, and etc. We do it all from this web UI. Moving to a central management means that we'll have smart console will connect to a dedicated Management Server out the object. So let's begin in this setup, I have my client machine, I have the SMB, and I have the management. So we'll start with the SMB through the home menu, I've went to security management and I'm changing this to central. I'm going to hit apply, now the first thing you notice is that all of the settings that we had here for firewall access control VPN are gone because this device will be managed through the smart console. So the first thing you need to do is to set up sec. So I'm going to go ahead and go to setup. If we're using a cloud service for management, you would select this in this case, I'm not select a sec password. So I'm going to go ahead and do that. Here I can select if I want to initiate the trust communication without authentication of course I don't want to do that. I'll select next, the management address. So the IP will be 192, 168 that 111 and I'm not going to connect now, I'm going to do it later. Finish, so I'm done here, now what I need to do is to go to the smart console, create a gateway object and install my policy. I have a simple any any accept policy. So let's go ahead and create the object. I'm creating a simple gateway object. I like to use the plastic method. Okay, so I'm going to give it a name. I'm going to call it SMB 8020 IP address 192 168 a one to one now and before I establish sick, I'm going to change the hardware to the 1550 appliance. It's wired, all right 20 guy embedded good now I will establish sick. [MUSIC] Now I can select if I want to initiate sick now or after the first installation. I'm going to go ahead and do it right now and we have trust and go ahead and press OK. This is the topology that I have so these are the interfaces. I'm going to press OK and let's install the policy. Click Install, now in the meantime we will go back to the SMB I can see that my status have changed to connected, which is good. I can see the management name the IP address and now it's going to wait for the security policy, just click apply to just give it that refresh. And look here we go, we have the policy name that is standard. If I go here and I'm going to open facebook for example, I do have connectivity. So now I'm still going through the SMB but now I'm using a different policy. The policy that we've got from this management, if you want to go back to local management, all you need to do is just click this, give it a few seconds to reapply all the configurations and then you'll be good to go and that's it. That concludes the management module. Thank you.
