What tools will I learn about in this course?

The course introduces BMS engineering and diagnostic tools used to develop, simulate, monitor, test, and troubleshoot AHU control logic. Specific tools are demonstrated where relevant to the learning activities.

What will I get if I subscribe to this Specialization?

When you enroll in the course, you get access to all of the courses in the Specialization, and you earn a certificate when you complete the work. Your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile.

Is financial aid available?

Yes. In select learning programs, you can apply for financial aid or a scholarship if you can’t afford the enrollment fee. If fin aid or scholarship is available for your learning program selection, you’ll find a link to apply on the description page.

AHU Control Logic and Programming

Ce cours n'est pas disponible en Français (France)

Nous sommes actuellement en train de le traduire dans plus de langues.

AHU Control Logic and Programming

Ce cours fait partie de Spécialisation "Understanding Building Management Systems"

Instructeur : Taught by Schneider Electric Experts

Inclus avec En savoir plus

3 modules

Obtenez un aperçu d'un sujet et apprenez les principes fondamentaux.

niveau Intermédiaire

Expérience recommandée

1 semaine à compléter

à 10 heures par semaine

Planning flexible

Apprenez à votre propre rythme

3 modules

Obtenez un aperçu d'un sujet et apprenez les principes fondamentaux.

niveau Intermédiaire

Expérience recommandée

1 semaine à compléter

à 10 heures par semaine

Planning flexible

Apprenez à votre propre rythme

Ce que vous apprendrez

Develop AHU control sequences using sensor inputs, setpoints, interlocks, schedules, and controller outputs.
Apply control logic and PID concepts to fans, dampers, valves, and temperature or pressure control.
Test, simulate, and troubleshoot AHU control logic using operating data and common BMS diagnostic methods.

Détails à connaître

Certificat partageable

Ajouter à votre profil LinkedIn

Récemment mis à jour !

septembre 2026

Évaluations

12 devoirs

Enseigné en Anglais

Découvrez comment les employés des entreprises prestigieuses maîtrisent des compétences recherchées

En savoir plus sur Coursera pour les affaires

logos de Petrobras, TATA, Danone, Capgemini, P&G et L'Oreal

Élaborez votre expertise du sujet

Ce cours fait partie de la Spécialisation "Understanding Building Management Systems"

Lorsque vous vous inscrivez à ce cours, vous êtes également inscrit(e) à cette Spécialisation.

Apprenez de nouveaux concepts auprès d'experts du secteur
Acquérez une compréhension de base d'un sujet ou d'un outil
Développez des compétences professionnelles avec des projets pratiques
Obtenez un certificat professionnel partageable

Il y a 3 modules dans ce cours

By the end of this course, learners will understand how AHU control sequences are translated into BMS control logic and controller programs. They will learn how sensors, setpoints, interlocks, alarms, schedules, PID control, digital outputs, and analog outputs work together to control fans, dampers, and heating or cooling devices in an Air Handling Unit.

Through guided demonstrations, practical examples, simulations, and troubleshooting scenarios, learners will explore how AHU control logic is developed, tested, and validated. They will also learn to identify common programming and control issues, interpret system responses, and use operating data to troubleshoot abnormal AHU behavior. This course builds on basic BMS and AHU knowledge and prepares learners for more advanced work in BMS interface design, commissioning, diagnostics, and building automation controls.

This module introduces the fundamentals of BMS programming environments, tools, and programming languages used for HVAC automation. Learners will explore different programming interfaces and understand how languages such as Ladder Diagram, Function Block Diagram, and Sequential Function Chart are used to develop BMS control logic. The module also demonstrates how basic programming concepts can be applied to AHU airflow regulation to support efficient, automated, and responsive HVAC operation.

Inclus

11 vidéos3 lectures4 devoirs4 plugins

11 vidéosTotal 32 minutes

What is BMS Programming? Automating HVAC for Smart Buildings4 minutes
Understanding Programming Interfaces2 minutes
Tool Spotlight: EcoStruxure™ Building Operation – WorkStation 4 minutes
Tool Spotlight: EcoStruxure™ Power Monitoring Expert 3 minutes
Introduction: Why Programming Languages Matter in BMS 3 minutes
Ladder Diagram (LD): Visual Logic for Control 3 minutes
Function Block Diagram (FBD): Modular Programming 3 minutes
Sequential Function Chart (SFC): Step-by-Step Control 2 minutes
Example: Temperature Control Function Block4 minutes
Introduction: Why Airflow Regulation Matters2 minutes
Key Components in Airflow Control2 minutes

3 lecturesTotal 30 minutes

Compatibility in BMS Programming10 minutes
Function Blocks in BMS Programming10 minutes
Comparing LD and FBD for AHU Control10 minutes

4 devoirsTotal 120 minutes

BMS Programming and AHU Control Logic30 minutes
Explore a BMS Interface30 minutes
Identify the Right Programming Language30 minutes
Simulate AHU Airflow Control Logic30 minutes

4 pluginsTotal 60 minutes

Hands-on Practice: Match the BMS Interface Components15 minutes
Hands-on Practice: Scenario_Choose the Right PLC Language15 minutes
Interactive Video_Writing Control Logic in Ladder Diagram (LD)15 minutes
Interactive Video_Writing Control Logic in Function Block Diagram (FBD)15 minutes

This module introduces learners to advanced BMS Controller configuration and programming for Air Handling Units (AHUs). Learners will configure controllers, develop and test control logic, validate communication, and apply their skills to design and implement a complete AHU control cycle within a BMS environment.

Inclus

12 vidéos3 lectures4 devoirs5 plugins

12 vidéosTotal 40 minutes

Introduction to BMS Controllers4 minutes
Addressing the BMS Controller in the System3 minutes
Tool Spotlight: BMS Configuration Interface5 minutes
Testing Communication with the BMS Controller4 minutes
Introduction to BMS Programming Concepts4 minutes
Declaring Variables in the BMS Controller4 minutes
Tool Spotlight: Logic Editor in BMS Software4 minutes
Testing and Debugging the Program2 minutes
Overview of the Practical Task3 minutes
Setting Up the BMS Environment2 minutes
Tool Spotlight: Simulation and Monitoring Tools2 minutes
Testing and Optimization3 minutes

3 lecturesTotal 30 minutes

Configuring Inputs and Outputs10 minutes
Writing Control Logic for AHU10 minutes
Control Cycle Components10 minutes

4 devoirsTotal 120 minutes

AHU BMS Configuration and Programming30 minutes
BMS Controller Configuration Basics30 minutes
BMS Programming Basics30 minutes
AHU Control Cycle Implementing30 minutes

5 pluginsTotal 75 minutes

Interactive Video: Declaring Communication Modules15 minutes
Hands-on Practice: BMS_Configuration_Challenge15 minutes
Hands-on Practice: AHU_Logic_Components15 minutes
Interactive Video: Assigning Variables to Logic Blocks15 minutes
Interactive Video: Implementing the Control Cycle15 minutes

This module focuses on simulating, testing, and debugging AHU control programs within a BMS environment. Learners will identify common programming issues, apply troubleshooting techniques, and validate system performance using simulation and diagnostic tools.

Inclus

13 vidéos3 lectures4 devoirs3 plugins

13 vidéosTotal 29 minutes

Introduction to Simulation in AHU Control2 minutes
Preparing the Simulation Environment2 minutes
Tool Spotlight: Simulation Interface Walkthrough2 minutes
Validating Performance and Debugging Basics2 minutes
Introduction to Debugging in BMS3 minutes
Common Issues in BMS Programming2 minutes
Debugging Techniques and Tools3 minutes
Tool Spotlight: BMS Diagnostic Interface2 minutes
Best Practices for Preventive Debugging2 minutes
Introduction to Hands-on Troubleshooting2 minutes
Identifying Problems in AHU Control Programs2 minutes
Tool Spotlight: BMS Troubleshooting Dashboard3 minutes
Providing Solutions and Validating Performance2 minutes

3 lecturesTotal 30 minutes

Key Steps for Simulation Setup10 minutes
Root Causes and Impact10 minutes
Root Cause Analysis Framework10 minutes

4 devoirsTotal 120 minutes

AHU Programming, Testing & Troubleshooting30 minutes
Simulation and Validation Concepts30 minutes
Debugging Basics30 minutes
Troubleshooting Basics30 minutes

3 pluginsTotal 45 minutes

Interactive Video: Running the Control Program in Simulation15 minutes
Hands-on Practice: Debugging Scenario15 minutes
Hands-on Practice: Spot the Issue_ AHU Monitoring & Control15 minutes

Obtenez un certificat professionnel

Ajoutez ce titre à votre profil LinkedIn, à votre curriculum vitae ou à votre CV. Partagez-le sur les médias sociaux et dans votre évaluation des performances.

Instructeur

Taught by Schneider Electric Experts

Schneider Electric

4 Cours1 330 apprenants

Offert par

Schneider Electric

En savoir plus sur Electrical Engineering

Schneider Electric
BMS Interface Design for Air Handling Units
Cours
Schneider Electric
Introduction to Building Management System
Cours
Schneider Electric
AHU Commissioning, Diagnostics, and Maintenance
Cours
Schneider Electric
AHU System Design and Sizing
Cours

Pour quelles raisons les étudiants sur Coursera nous choisissent-ils pour leur carrière ?

Felipe M.

Étudiant(e) depuis 2018

’Pouvoir suivre des cours à mon rythme à été une expérience extraordinaire. Je peux apprendre chaque fois que mon emploi du temps me le permet et en fonction de mon humeur.’

Jennifer J.

Étudiant(e) depuis 2020

’J'ai directement appliqué les concepts et les compétences que j'ai appris de mes cours à un nouveau projet passionnant au travail.’

Larry W.

Étudiant(e) depuis 2021

’Lorsque j'ai besoin de cours sur des sujets que mon université ne propose pas, Coursera est l'un des meilleurs endroits où se rendre.’

Chaitanya A.

’Apprendre, ce n'est pas seulement s'améliorer dans son travail : c'est bien plus que cela. Coursera me permet d'apprendre sans limites.’

Débloquez l'accès à plus de 10 000 cours grâce à un abonnement
Faites progresser votre carrière avec un diplôme en ligne
Obtenez un diplôme auprès d’universités de renommée mondiale - 100 % en ligne
Rejoignez les 4 700 entreprises internationales qui ont choisi Coursera for Business.

Foire Aux Questions

You will learn how AHU sequences are converted into BMS control logic using sensors, setpoints, interlocks, outputs, PID control, alarms, and operating conditions. You will also explore testing and troubleshooting methods.

No prior programming experience is required. Basic familiarity with BMS fundamentals, AHU operation, sensors, actuators, and control concepts is helpful.

The course uses guided demonstrations, simulations, interactive activities, and troubleshooting scenarios to show how AHU control logic is developed and tested in BMS applications.

To access course materials, assignments, and earn a Certificate, you'll need to purchase the Certificate experience when you enroll in a course. Eligible learners may also have the option to start with a Free Trial. Some courses may also offer a Full Course, No Certificate option. This lets you access course materials, submit required assessments, and receive a final grade, but you won't be able to earn or purchase a Certificate.