What does simulation-driven RF design in ADS mean in this course?

It means using ADS to predict how RF and microwave circuits will behave before hardware is built, rather than relying on circuit intuition alone. The course focuses on analyzing circuit response, matching, transmission-line behavior, and layout-driven effects as part of a practical design process.

When would you use this simulation-driven approach?

You would use it when a high-frequency design needs to be checked before fabrication, especially when impedance, bandwidth, loss, or layout effects can change performance. In this course, that includes validating matching behavior, transmission-line behavior, and whether a schematic still looks realistic once physical effects are considered.

How does simulation-driven RF design fit into a broader workflow?

It sits between the first circuit idea and the final physical implementation, helping you turn a schematic into something you can test and refine with confidence. The course treats it as a repeatable loop of building a design, simulating it, interpreting the results, and updating the circuit or layout.

How is simulation-driven RF design in ADS different from trial-and-error prototyping?

Instead of finding problems only after hardware is built, simulation-driven design checks matching, gain, transmission-line behavior, and layout effects earlier in the process. In this course, the emphasis is on using simulation to guide design decisions first, then moving into electromagnetic validation when circuit-level results are not enough.

Do you need any prerequisites before learning simulation-driven RF design in ADS?

A basic understanding of circuits and common electronic components is helpful before starting. Prior RF experience can make the material easier, but the course is designed to build practical simulation skills step by step.

What tools, platforms, or methods are used in this course?

The course centers on Keysight ADS, including ADS Momentum for electromagnetic simulation. Learners mainly work with S-parameter analysis and impedance-matching methods using transmission lines and Smith charts.

What specific tasks will you practice or complete in this course?

You practice setting up RF schematics, running DC, AC, and S-parameter simulations, modeling transmission lines, and designing matching networks. You also interpret Smith charts and simulation plots, then refine layouts with electromagnetic validation to check coupling, parasitics, and other high-frequency effects.

RF/Microwave Design - RF Simulation Tools (ADS)

Sparen Sie mit 40% Rabatt auf 3 Monate Coursera Plus bei den Fähigkeiten, die Sie zum Strahlen bringen. Jetzt sparen

kurs ist nicht verfügbar in Deutsch (Deutschland)

Wir übersetzen es in weitere Sprachen.

RF/Microwave Design - RF Simulation Tools (ADS)

Dozenten: Starweaver

Bei enthalten

Mehr erfahren

3 Module

Verschaffen Sie sich einen Einblick in ein Thema und lernen Sie die Grundlagen.

Stufe Mittel

Empfohlene Erfahrung

4 Stunden zu vervollständigen

Flexibler Zeitplan

In Ihrem eigenen Lerntempo lernen

3 Module

Verschaffen Sie sich einen Einblick in ein Thema und lernen Sie die Grundlagen.

Stufe Mittel

Empfohlene Erfahrung

4 Stunden zu vervollständigen

Flexibler Zeitplan

In Ihrem eigenen Lerntempo lernen

Was Sie lernen werden

Perform DC, AC, and S-parameter simulations in Keysight ADS to analyze RF circuit performance.
Analyze transmission lines and design impedance matching networks in ADS using Smith charts and transmission line models.
Configure and validate electromagnetic (EM) simulations in ADS Momentum to predict real-world RF component and system behavior.

Kompetenzen, die Sie erwerben

Kategorie: Schematic Diagrams
Kategorie: Electronics Engineering
Kategorie: Verification And Validation
Kategorie: Hardware Design
Kategorie: Performance Tuning
Kategorie: Simulation and Simulation Software
Kategorie: Simulations
Kategorie: Electrical Engineering
Kategorie: Electrical and Computer Engineering
Kategorie: Communication Systems
Kategorie: Telecommunications
Kategorie: Electronic Systems
Kategorie: Electronics

Werkzeuge, die Sie lernen werden

Kategorie: electromagnetics

Wichtige Details

Zertifikat zur Vorlage

Zu Ihrem LinkedIn-Profil hinzufügen

Kürzlich aktualisiert!

Februar 2026

Bewertungen

1 Aufgabe

Unterrichtet in Englisch

91%

of learners achieved a positive career outcome

Erfahren Sie, wie Mitarbeiter führender Unternehmen gefragte Kompetenzen erwerben.

Weitere Informationen zu Coursera für Unternehmen

Logos von Petrobras, TATA, Danone, Capgemini, P&G und L'Oreal

In diesem Kurs gibt es 3 Module

Modern RF systems—spanning wireless communications, radar, satellites, and emerging 5G/6G technologies—demand precise circuit design and validation. As frequencies rise, traditional circuit intuition becomes unreliable, making advanced simulation essential for predicting real-world behavior before hardware is built.

This course equips learners with practical, industry-ready skills in RF and microwave design using Keysight ADS. Through guided demos and hands-on labs, you will master S-parameter analysis, transmission-line modeling, impedance matching, and electromagnetic (EM) simulation with Momentum. Real engineering scenarios show how coupling, parasitics, and layout effects influence performance, and how ADS enables accurate prediction and optimization. By the end of the course, you will confidently design RF schematics, evaluate matching networks, analyze antennas and filters, and refine layouts through EM-based validation. Whether you are building wireless front-end modules, optimizing radar components, or modeling high-frequency behavior for next-generation systems, this course provides the applied expertise needed to produce manufacturable, professional-grade RF designs.

Moduldetails

Master the fundamentals of high-frequency circuit simulation using Keysight ADS, the industry-standard RF simulation tool. Students will learn to navigate the ADS interface, set up RF circuit simulations, understand S-parameters and frequency domain analysis, and interpret simulation results. This foundational module establishes the skills needed to simulate and validate RF circuit performance before physical prototyping, enabling efficient design iteration and optimization.

Das ist alles enthalten

4 Videos2 Lektüren1 peer review

4 VideosInsgesamt 33 Minuten

Course Introduction3 Minuten
Setting Up Your First ADS Project and RF Schematic6 Minuten
Running S-Parameter Simulations and Reading Results in ADS8 Minuten
Time-Domain and AC Analysis for RF Circuits in ADS16 Minuten

2 LektürenInsgesamt 10 Minuten

Welcome to the Course: Course Overview5 Minuten
A/RF Circuit Analysis: Simulation Across Frequency Spectrums5 Minuten

1 peer reviewInsgesamt 20 Minuten

Hands-On-Learning: Designing a Simple Matching Network in ADS20 Minuten

Master transmission line simulation and impedance matching using Keysight ADS. Students will learn transmission line fundamentals, understand impedance concepts and the Smith chart, and design impedance matching networks. This module emphasizes how proper impedance matching ensures signal integrity, maximizes power transfer, and enables optimal RF system performance in wireless communications, radar, and satellite applications.

Das ist alles enthalten

3 Videos1 Lektüre1 peer review

3 VideosInsgesamt 25 Minuten

Simulating Transmission Lines with Different Impedances in ADS5 Minuten
Advanced Impedance Matching Techniques for Broadband Circuits5 Minuten
Smith Chart and Filter Design Applications in ADS15 Minuten

1 LektüreInsgesamt 5 Minuten

Transmission Line Analysis: Cable Health Case Study5 Minuten

1 peer reviewInsgesamt 20 Minuten

Hands-On-Learning: Building and Analyzing a Bandpass Filter Circuit20 Minuten

Master electromagnetic simulation using Keysight ADS to evaluate component behavior and RF system performance. Students will learn when and why to use EM simulation, understand how to set up 3D electromagnetic simulations, and interpret EM simulation results. This module emphasizes how EM simulation reveals coupling effects, radiation patterns, and component interactions that circuit-level simulation cannot capture, enabling accurate prediction of real-world RF system performance.

Das ist alles enthalten

4 Videos1 Lektüre1 Aufgabe2 peer reviews

4 VideosInsgesamt 24 Minuten

Introduction to Electromagnetic Simulation with Momentum6 Minuten
Simulating Antennas and Antenna Arrays with EM Tools7 Minuten
Advanced EM Analysis: Coupling and Cross-Talk in Complex Circuits8 Minuten
Course Wrap-Up3 Minuten

1 LektüreInsgesamt 5 Minuten

Why RF Engineers Need EM Simulation for Designing RF Circuits5 Minuten

1 AufgabeInsgesamt 20 Minuten

RF/Microwave Design - RF Simulation Tools (ADS)20 Minuten

2 peer reviewsInsgesamt 80 Minuten

Hands-On-Learning: Designing and Optimizing an RF Component with EM Simulation20 Minuten
Project: Complete RF Circuit Design Project: From Specification to EM Validation60 Minuten