This course explores the analysis and design of beam bending problems. Prerequisite Knowledge: You will need to have successfully completed my earlier course “Mechanics of Materials I: Fundamentals of Stress and Strain and Axial Loading” in order to be successful in this course ------------------------------------------------- The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.
NG
Its good to learn this e learning course. Good presentation and fantastic job by the professor
DG
Simple, concise, designed to be practical and clear.. Instructor is very proficient and material provided is clear.
VK
Explains the fundamentals of Beam bending and the topics covered are in great way and looking to finish MOM part 4
LL
This course is good for reviewing gneral concpts. I recomend to have a book (for ezample Beer, Hibbeler) to support lessons along each chapter.
MM
a very good and comprehensive course with clear explanation in not so lengthy modules. good for anyone in the Structural or Mechanical Engineering who wants to understand more about Beam Bending
MP
Hello, thank you for your efforts in the course. It was very useful and beautiful. I hope you will always be healthy and happy. Mohammad Pakzad from Iran.
PV
Wonderful lectures. Very useful for Stress Analysis Engineers. Completed 3 courses in MOM and planning for the 4th.
GA
It's really helpfull compared to my classes. And it was easy to understand and the teaching is really simple and clear.Thanks a lot for helping me out with this course.
MK
FUNDAMENTALS AND ADVANCED STUDY PERSON CAN LEARN THROUGH THIS COURSE IN WHICH BEAM BENDING THEORY, PURE BENDING, SHEAR AND BENDING DIAGRAM AS WELL AS WHOLE COURSE ARE DESCRIBED WELL.
AS
Thanks to Dr Whiteman! Explanation of the concepts of beam calculations was exceptional. and easy to understand.
VN
Very good , this is absolutely amazing course and the teaching skills and good professor 🫡
GJ
This is a good course. I like all the part Mechanics of Materials. I suggest you to please go through the Specialization of this course.
Showing: 20 of 178
Fundamental course on solid mechanics, as previous courses this also very well explained and delivered. An asset to mechanical and civil engineering students.
Course was amazing, it helped me alot, in clearing my basics, Special thanks to Dr. Wayne Whiteman, Georgia Institute of Technology & Coursera.
The lessons are well organised. Technical skill and knowledge develops as one progresses in the course.Theory is very well explained and real engineering problems are used to provide first hand experience in doing calculation which consequently helps in developing confidence. Looking forward to the next course in this series.
This is a good course. I like all the part Mechanics of Materials. I suggest you to please go through the Specialization of this course.
Today I have another interesting course on mechanics of materials, thank you very much for providing such a great course.
Wonderful lectures. Very useful for Stress Analysis Engineers. Completed 3 courses in MOM and planning for the 4th.
Explains the fundamentals of Beam bending and the topics covered are in great way and looking to finish MOM part 4
The course is designed for a poorly trained student or without training. For a civil engineer (building), the course will be simple. The entire course was completed in about 6 hours.
Full of incorrect info
Dear Mr. Whiteman,
I am very grateful to you because this course I took. I have learnt the basics rules to design a structures beam, which I should complement this course with my next courses in my university about Reinforced Concrete, Structural Analysis, Earthquake engineering, etc. I hope to apply this course in my course about mechanics of materials in my university. Thank so much for the courses.
Best Wishes,
AIVZ
Course is simply superb, Professor explains it very neat and clean. Thank you so much professor. I'm very thankful to you in this life. Your consistency helped me learn the fundamentals really good, and i wish to keep my foundations like a rock solid like your course and explanation.
Course was amazing, it helped me alot, in clearing my basics, Special thanks to Dr. Wayne Whiteman, Georgia Institute of Technology & Coursera. This is a good course. I like all the part Mechanics of Materials. I suggest you to please go through the Specialization of this course.
It was really fun to learn with Dr. Wayne Whiteman. He is an amazing teacher ,no doubt about that.I really enjoyed the full course with him.Hope that,one day I will attend his class physically.Lots of love and respect to him.
Iftekhar, Dhaka, Bangladesh
The Course was Amazing,it helped me a lot in clearing my basiscs.The lessons are well organised .simply the course is superb .Dr.Wayne Whiteman,Georgia Institute of Technology & Coursera. explains it very well . a good Explanation.
The Mechanics of Materials course series is a must for any engineer. The material is presented in a logical and straight forward manner with applications to the real world. Dr. Whiteman is truly a a great teaching Professor!
It's a very good course for Engineers especially for mechanical background students.
Got to learn everything what I needed for beams and beam bending.
Concepts were explained very clearly with lots of examples.
Such a wonderful course! Dr. Wayne Whiteman's ability to deliver concepts in concise packets combined with real world problems makes this course a must take by every mechanical engineering under grad student.
LAS CLASES IMPARTIDAS POR EL PROFESOR DR. WHITEMAN SON EXCELENTES DE IGUAL FORMA EL MATERIAL QUE NOS PROPORCIONAN ESTA MUY BIEN ESTRUCTURADO, RAZÓN POR LO CUAL ES UNA INSTITUCIÓN DE LAS MEJORES DEL MUNDO.
a very good and comprehensive course with clear explanation in not so lengthy modules. good for anyone in the Structural or Mechanical Engineering who wants to understand more about Beam Bending
FUNDAMENTALS AND ADVANCED STUDY PERSON CAN LEARN THROUGH THIS COURSE IN WHICH BEAM BENDING THEORY, PURE BENDING, SHEAR AND BENDING DIAGRAM AS WELL AS WHOLE COURSE ARE DESCRIBED WELL.