This course doesn't give any insight about the algorithms.

This course has no value!!! it's using obsolete tools.

Wors ML course I've had on Coursera so far.

Too hard

I would avoid this course. The course structure is badly organised and hard to follow, the material covered is lacking in detail on key underlying concepts that are key to learning what you're doing and the notes provided do not provide key information that would let them be used as reference material for you to go back and review.

But - much more importantly - the course notes and information have been written using an old, out of date, library, while the tests and some of the material refers to a newer library that is not a direct replacement. As a result, many of the instructions and guides don't work at all, or are incredibly hard to understand with the new model.

Finally, also as a result, many of the test question's answers are wrong - when you do the questions using the new library you get an answer that the automatic grading says is wrong - even though it is correct.

And there is no help in the dicusssions from moderators.

So while this may have been a passibly acceptable course at one time, it is now basically a frustrating, bi-polar mess, with no help provided to guide you.

I have a few concerns regarding this course. First of all the instructor strongly suggested that we should use python and turicreate package. I had several difficulties in installing turicreate on my mac. There was no help avaliable on the forum in this regard. Finally, I ignore the instructions and downloaded anaconda and then downloaded turicreate.

But it turns out that the instructors are not using turicreate in lectures but graphlab package. Moreover, the instructors using python 2.7, which has a different syntax than python 3.

This made learning much harder and frustrating.

i was very excited to start this course but the turicreate causes a lot of problems in your pc as it requires wsl to be installed(whenever i try to load data into sframe for some reason my pc doesnt allow it to read those files in the virtual environment and many technical issues such as that).. i found all of this very frustrating and im extremely disappointed. I tried to fix those technical issues through internet but to no avail. im extremely disappointed and i will unenroll from the course unless they come up with another way for implementing python codes

So much hope - the instructor videos were so energetic - the use-case first approach so cool. BUT - we need to use Turi - and for the life of me I couldn't get it going on Windows. There are multiple forums where people have the same error. I hope they had not forced this - even though they say they are open to any software, I needed Turi to get sframes working.

Please fix it - you seem like great teachers - and it would be a shame to see this course not be leveraged.

You don't have any explanation of how to install turicreate, SFrame ... None of the solutions that I've found out on the web worked out. I've been wasting more than a month for dealing with this kind of problems and also there are many people, who are taking this course, in the forums and dealing with same problems. And there are also some chapters are not available and there is no logical reasoning with that. I feel sorry for choosing this course at the beginning.

Hi there , I have find difficulty in completing the course, the packages that are used in python are outdated, or that are used in python 2 version like turi create and sframes,, as for now I have python 3 version , so i find difficulty to undustand the coding discussed in the course., or they can use pandas or scikit packages for more convinence, for getting upto date knowledge.so i am sorry, that i have decided to not learn the course

I did not like the classes, specifically. The videos are monotones and not straightforward. I have been trying to unenroll from it, but the button does not work. Also, trying through the 3 dots on MyCoursera Page does not show the Uneroll option. Therefore, I will rate it with one star because it does not allow me to unenroll from it and these kind of problems are quite common with Coursera.

Not focusing on Basics of Machine Learning rather to focus on specific software application on Turi . Unable to complete the quiz which is based on non-user friendly Turi software installation.

Please be generic and encourage to use Jupyter Ipython notebook to use common libraries to focus on Machine Learning basics not to promote Turi or specific software to complete the course

Самое трудное это заставить работать используемые в этом курсе библиотеки. Дошло до установки виртуальной Убунты, и то оно так и не заработало на 100%. Да, можно использовать их колабные ноутбуки, но в чем смысл изучать материал на каких-то левых непопулярных и кривых библиотеках, я не понимаю. Надеюсь, что опыт работы с фреймами можно будет применить где-то еще, кроме их курсов.

Absolutely no help from the course moderators regarding how to run a program, which they've made it over complicated. I've been using Python for a while now and this is not even remotely student friendly, which has forced me to discontinue the course since I am unable to do the assignment required for the assessment.

Sorry， I have to give it up and provide a low rating. I think the materials provided are not connected and make me lost. Especially, I can not download Turicreate on my laptop and have to use Colaboratory. So I learn graphlab and try Graphlab on Colaboratory. All three things make me dizzy.

Too hard to install Turicreate on MacOs and windows. Quitting the classes because I wasted 3 hours and wasn't able to install this Turicreate on any of my systems. To solve the quiz the files are in sframe format, can't use pandas to open this type of file format

Not worth doing. Notes are insufficient to help install packages needed to follow the course. Many had posted on the same error message but there has been no guidance. Support is very poor, Course materials are outdated. Not recommended.

Teaching with an unfamiliar tool that is so difficult in installing i.e Sframe, Graphlab and turic create. You should first start with the process of installation before starting your teaching. Wasted resources.

The software was so difficult to install. It did not seem worth it to learn a completely new way. Unfortunately, I dropped it because the case study approach looked interesting.

Couldn't even get started. Very disappointed that the links to the software required are so out of date and there is no help. Want to un-enroll but can't do that either.

The instructions for setup of turicreate were lacking.

No information was provided on setup of GraphLab Create, which prevents course completion.

The course is very very confusing. Old material without updating to the latest format. No clear instructions. Half baked.

its very very hard to setup jupyter notebbok and installing turicreate ,also takes a lot of efffort in practical quiz

Unable to install turicreate. No troubleshooting instructions, only a link to a blog post that offers little help.

Out-of-date content without support on how to set things up. Wasted 10 hours just to try and get things to work.